Limit Position And Cut- Down Position Initialize - Roland SP-300 Service Manual Book

Chapter 2
Chapter 2
Limit & Cut
Limit & Cut
• Purpose
It is designed to memorize both the limit in carriage
moving direction and also the position for the Auto
Sheet Cutter to move down.
Based on the limit, following positions will be
memorized, too.
1. Head Capping Position
2. Head Carriage Locking Position
3. Flushing Position
• Necessary when....
1. Main Board is replaced.
2. Carriage Wire is replaced.
3. Auto Sheet Cutter Assembly is replaced.
- 6 :
- 6 :
- Down Position Initialize
- Down Position Initialize