Pinch Roller Replacement - Roland SP-300 Service Manual Book

3-11 PINCH ROLLER REPLACEMENT

Remove the E RING on one side of the PINCH
1
ROLLER and pull out the SHAFT.
Make sure not to lose the washers.
Put the new PINCH ROLLER with washers and insert
2
the SHAFT into the PINCH ROLLER.
Fixing operation becomes easy when you put the
washers to the PINCH ROLLER with grease.
Red marking is done on the outer side of
LEFT & RIGHT PINCH ROLLERS.
Fix the E RING and make sure that the PINCH
3
ROLLER rotates smoothly.
PINCH ROLLER
SHAFT
3 Replacement of Main Parts
E RING
3
E RING
3-43