Door Assembly; Internal Finishing Panels; Fixed Glasses; Window Regulator Devices And Glasses - Alfa Romeo alfa 33 Workshop Manual

DOOR ASSEMBLY

REMOVAL AND
INSTALLATION
With reference to exploded view
proceed as follows:
1. Unscrew the four screws secur-
i n g h i n g e s @ a n d I@ t o d o o r
and remove it.
l a . O n l y f o r t h e 1 5 0 0 a n d 1 5 0 0
Quadrifoglio models.
Disconnect harness and then proceed
as per step 1.
2. For door installation reverse
order of removal, tighten screws
securing hinges to door
prescribed torque:
Screws securing hinges to door
(1.36 + 2.2 kgam
9.83 f 15.9 ft.lb)
INTERNAL FINISHING
PANELS
C o v e r e n d o f t h e t o o l u s e d f o r
removing plastic rivets in order not
to damage or scratch the body.
REMOVAL AND
INSTALLATION
1. Lift ornament of armrest @
and unscrew the three securing
screws, then remove it.
2. Remove ornament covering the
door securing screw, then remove
window regulator handle @I _
3. Remove plastic rivets securing
panel @ to door. Remove panel
by bending it.
4. Remove plastic rivets securing
upper trim @ todoor.
5 . R e m o v e h o o k o f d o o r l o c k
control rod,
t r i m @ .
6. For upper
installation, reverse order of removal.
to the

FIXED GLASSES

REMOVAL AND
INSTALLATION
1. Remove
trim
glass 11 .
2 . U n s c r e w t h e s c r e w s e c u r i n g
fixed glass guide 8 to door, move
sealing screen 19
spacer 0.
3 . U n s c r e w t h e s c r e w s e c u r i n g
fixed glass guide @ to door frame.
4. Slightly detach the glass velvet
seal @I in correspondence with
fixed glass guide @ and remove
guide.
5. Remove fixed glass.
6. Install fixed glass by reversing
order of removal.
DOORS
then remove upper
trim and panel
panel , upper
and lower completely
and recover
5 5 - 7
WINDOW REGULATOR
DEVICES AND
GLASSES
REMOVAL AND
INSTALLATION
1. Remove panel
trim @ and sealing screen
2 . L o w e r c o m p l e t e l y g l a s s 1 1
and windscreen the two nuts securing
window regulator device to glass.
3. Unscrew the three nuts securing
window regulator @ to door and
remove it from lower side by lifting
glass 0 .
Remove fixed glass guide @
4.
and fixed glass @.
5. Remove glass 0 .
6. Install glass and window re-
gulator by reversing order of re-
moval.
19 .
8
May 1983