Front Combination Lamps - Alfa Romeo alfa 33 Workshop Manual

FRONT COMBINATION LAMPS

R E M O V A L A N D
INSTALLATION
With reference to the exploded view
proceed as follows.
Operating from engine com-
1.
partment inside, disconnect harness
from cover 0.
2. Remove grille (see: Group 75 -
Grille).
3. Unscrew the two nuts securing
combination lamps to body.
4.
Operating from fender inside,
unscrew nut securing combination
lamps to fender itself
move it.
ELECTRICAL SYSTEM
1 Front
combination lamp
2 Halogen lamp
3 Securing spring
4 Supply connector
5 C o v e r
6 Lamp holder
For combination lamp installa-
tion, reverse order of removal.
6. Adjust luminous beam by fol-
lowing the procedures described in
"Setting of headlights low beam".
Replacement
er @ can be carried out on mounted
combination lamps 0, by operating
f r o m e n g i n e comparment inside.
(1)
Rotate lampholder @ counter-
clockwise and withdraw it from
transparent cover IO
and re-
7 L a m p
8 Lampholder
9 Lamp
11 Headlight wiper clamp
of transparent cov-
40-l 7
(2) Unscrew the two screws secur-
ing transparent cover @J to com-
bination lamps 0, then remove it.
May 1983