When are removed welding spots of the three over-
lapped sheets drill the whole (welding spots are
identified by dimension line shown in the figure).
M a y 1 9 8 3
BODY -SHEET METAL PANELS
R E
.
E R W H
A L L I N G
M I N D
E N I N S T
Install together radiator core support and hoodledge
panel; then verify alignment dimensions concerning
hoodledge panel.
Refer to drawings provided in
"Body Alignment".
Carry out, from both sides, MIG plug welding of
drilled sheets.
MIG welding