Table of Contents
Advertisement
NOTE:
The engine locking function is guaranteed by
the Alfa Romeo CODE, which is automatically
activated when the key is extracted from the
ignition switch.
The alarm is adapted to meet requirements
in various countries.
T
A
T
S
O
RM
HE
YSTEM
With the doors and decklid closed, and the
ignition key either placed in the STOP (OFF/
LOCK) position, or removed, point the key
towards the vehicle then push and release the
lock button.
The system emits a visual signal and activates
door locking.
A self-diagnosis stage lasting approximately
30 seconds precedes the activation of the
alarm. During the self-diagnosis, the vehicle
security light flashes in the instrument panel at
a frequency of about one flash per second.
After the self-diagnosis stage, the vehicle
security light flashes at a lower frequency
(approximately one flash every three seconds).
If, after the alarm is armed, a second visual
signal emits via the vehicle security light in the
instrument panel, wait about four seconds and
deactivate the alarm by pushing the lock
button. Then, check that the doors and decklid
are closed correctly and then reactivate the
system by pushing the unlock button.
If the alarm emits a visual signal even when the
doors and decklid are closed correctly, a system
malfunction has occurred: in this case, contact
an authorized dealer.
T
D
T
S
O
ISARM
HE
YSTEM
Deactivation
Push the unlock button.
The following operations are performed:
Two brief flashes of the direction indicators
Unlocking of the doors
NOTE:
If the central door locking system is released
using the mechanical key, the alarm is not
disabled or enabled.
In the event of accidental activation of the
alarm, or in any case to interrupt the visual
signal cycle when activated, it is possible to
push the unlock button or turn the ignition key
to MAR (ON/RUN) for at least five seconds,
after which the system will deactivate.
Disarming
To completely disable the alarm (e.g. during a
lengthy period of vehicle inactivity), lock the
vehicle by turning the mechanical key in the
door lock.
NOTE:
If the batteries of the key fob run out or there is
a fault in the system, the alarm can be deacti-
GETTING TO KNOW YOUR VEHICLE
vated by inserting the key into the ignition
switch, and placing it in the MAR (ON/RUN)
position.
DOORS
C
D
L
/U
ENTRAL
OOR
OCKING
Locking/Unlocking Doors From The Inside
Push the lock LED indicator button. The button
has an LED that indicates whether the doors are
locked or unlocked.
Pushing the lock LED indicator button again
centrally unlocks all doors and switches off the
LED.
Pushing the lock LED indicator button again
centrally locks all the doors. The doors will be
locked only if all the doors are properly shut.
Once the doors have been locked using the key
fob or mechanical key, it will no longer be
possible to unlock them by pushing the lock LED
indicator button.
NOTE:
In the absence of electrical power supply (blown
fuse, battery disconnected, etc.), it is still
possible to lock the doors manually.
Locking Doors From The Outside
With the doors closed, push the lock button on
the key fob or turn the mechanical key (located
inside the key fob) in the door lock.
11
2
NLOCKING
Advertisement
Table of Contents
