SERVICE DATA AND SPECIFICATIONS
GENERAL SPECIF~ICATIONS
FLUIDS AND LUBRICANTS
Application
Drive shaft assembly constant-speed
joints (for each joint)
Split grease quantity between the two
sides of each joint;s crown of steel balls
TIGHTENING TORQUES
Screws securing (in oil), with outer spacer, drive
shaft assembly to differential shaft
Nuts securing drive shaft assembly to wheel hub
TROUBLE DIAGNOSIS AND CORRECTIONS
Condition
reversal
Tool number
May 1983
DIFFERENTIAL AND DRIVE SHAFT ASSEMBLY
GREASE
Probable cause
Too much play between seats and
l
steel balls
enough lubricating grease and
l
leakage from the boots
SPECIAL SERVICE TOOLS
Base for withdrawal and fitmend of drive
shaft from constant speed joint.
Denomination
Molykote VN 2461 C
or Optimal Olistamoly 2 LN 584
Std. No. 3671-69843
33
36
3.4 + 3.7
23
226
Tool name
24.58 + 26.75
166.30 + 202.46
Corrective action
Replace the joint
Smear with grease and replace boots
(2.82 oz)
Refer to