Pedal Assembly - Alfa Romeo alfa 33 Workshop Manual

P E D A L A S S E M B L Y
1 Retainer
2 Washer
3 G a s k e t
4 Pedal assy bracket
5 Stop light switch
6 Pin
DISASSEMBLY
Carry of pedal assembly
operating as follows:
a. Engine seat
1. Disconnect electrical wiring @
of brake fluid level warning light and
with a syringe take out all brake and
clutch fluid from reservoir
2. Unscrew unions @ connecting
the four pipes that start out from the
brake master cylinder 0. F r o m
clutch master cylinder @ remove
the pipe @ and the hose @ con-
necting it to the reservoir.
3 . F r o m s e r v o b r a k e r e m o v e t h e
0
connected to the vacuum
sleeve 9
intake pipe.
4 .
R e m o v e s c r e w
sheath clamp plate of the accelerator
control cab le.
M a y 1 9 8 3
FRONT AND REAR BRAKES
7
8 Spacer
9 Accelerator pedal
10 Bolt
11 Plastic bush
12 Pin
securing
1 Hose
2 Clutch master
cylinder
3 Pipe
4 Pipe unions
5 Brake master
cylinder
6 Brake liquid tank
7 Electric cables
Screw
9 Sleeve
2 2 - 4
13 Brake pedal
14 Bull ring
15 Spring
16 Spacer
17 Clutch pedal
b. Passenger compartment
1. Separate from accelerator pedal
the control cable @ and release
electric connection @ of the stop
light switch.
2. By removing retaining rings,
return springs and connecting pins
disconnect the brake and clutch
p e d a l s f r o m c o n t r o l f o r k s @
a n d @ o f t h e r e l e v a n t
cylinders.
3. By unscrewing the four securing
nuts separate from pedal
assembly the servobrake - braker
master cylinder unit.
4. By unscrewing the two securing
b o l t s @
remove clutch master
cylinder from pedal assembly.
5 . U n s c r e w t h e s i x n u t s ( s e t i n
evidence by figure) securing pedal
a s s e m b l y t o b o d y a n d r e m o v e
pedal assembly from engine seat.
6. Remove, if necessary, the acce-
lerator pedal from hinge to pedal
assembly support by unscrewing
bolt @.
(kg-m
master