Table of Contents
Advertisement
Loosen clamp and remove filter.
Remove foam.
3
V02A0ZY
1. Clamp
2. Air filter and foam
3. Screw driver cap
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put the filter in to soak.
While filter soaks, clean inside of air
box.
Rinse air filter and foam with warm
water.
Squeeze foam to remove excess wa-
ter. Let dry air filter and foam thor-
oughly.
NOTE:
Slight dust may be cleaned us-
ing a low-pressure airgun. Blow com-
pressed air backward of operating air
flow.
If air filter element or foam is dirty,
replace with a new one.
When the filter is dried, re-oil with air
filter oil (P/N 219 700 340) or an equiv-
alent.
Air Filter Installation
Properly reinstall removed parts in the
reverse order of their removal.
______________________
92
2
1
Electrical
WARNING
Unless otherwise indicated, al-
ways turn ignition switch to the
OFF position before performing
any maintenance or repair on elec-
trical system.
Battery
Cleaning
Clean battery post with a wire brush.
Apply dielectric grease (P/N 293 550
004) or an equivalent on post to pro-
tect against oxidation.
Removal
Disconnect BLACK (-) cable first then
RED (+) cable.
WARNING
Always respect this order for dis-
assembly; disconnect BLACK (-)
cable first.
Remove bolts retaining battery holder
and rack.
2
V02G0SY
1. Battery holder
2. Rack
Installation
Reinstall battery in vehicle. Fasten
battery holder.
1
Hide quick links:
Advertisement
Table of Contents
