Brakes; Body/Frame - BOMBARDIER DS650 2005 Operator's Manual

V02J04Y
1. Adjuster

Brakes

Front and Rear Brakes
The front and rear brakes are hydraulic
disc types. These brakes are self-ad-
justing and require no adjustment.
Check brake line fittings tightness be-
fore every ride.

Body/Frame

Engine Area
Check engine area for any damage
and leaks. Ensure all hose clamps
are properly secured and no hose is
cracked, kinked or otherwise dam-
aged. Inspect muffler, battery and
reservoir fastening devices. Check
electrical connections for corrosion
and tightness. Replace or have dam-
aged parts repaired.
Skid Plate
Check tightness of fasteners and
condition of plate for cracks or other
damage. Properly retighten fasteners
as necessary and have skid plate re-
placed if damaged.
_____________________
104
Front Fenders
Check tightness of fasteners and con-
dition of front fender for cracks or
other damage. Properly retighten fas-
teners as necessary and have front
fender replaced if damaged.
1
Fasteners
Check fastener condition and tight-
ness on the vehicle. Retighten as
required.
Seat Latch
Remove seat and check latch mecha-
nism and pin for wear. See an autho-
rized Bombardier ATV dealer for parts
replacement if damaged.
Frame
Check frame for cracks or other dam-
age. See an authorized Bombardier
ATV dealer for replace or repair.
Vehicle Cleaning and Protection
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply non-abrasive wax.
CAUTION:
parts with strong detergent, de-
greasing agent, paint thinner, ace-
tone, etc.
WARNING
Never remove the front fenders.
The important labels are applied
on the front fenders. Operating
without front fender, increases
your chances of severe injury in
the event of an accident.
Never clean plastic