Table of Contents
Advertisement
Adjust cable free play.
V02D04Y
A. 3.5 ± 0.5 mm (9/64 ± 1/64 in)
Clutch Cable Lubrication
Remove the cable from the engine.
Remove the cable from the hand lever.
Put the cable luber (P/N 529 035 738)
or an equivalent on the cable.
Insert the needle of the spray can in
the hole.
Spray silicone lubricant (P/N 293 600
041) or an equivalent until it exits the
other end of the cable.
WARNING
Always use a silicone-based lu-
bricant. Using another lubricant
(like water-based lubricant) could
cause the clutch lever/cable stick-
ing or stiffness.
Suspension
X Models
CAUTION:
The DS 650 X are
equipped with shock protectors.
Open or remove them when the am-
bient temperature is high or when
the vehicle is used intensively. Oth-
erwise, performance degradation
or damage can be caused to the
shock absorbers.
NOTE:
Do not remove the shock
protectors if the vehicle is used on a
gravel surface.
A
_____________________
Lubrication
Front A-Arm
Lubricate front A-arms with a grease
gun.
Use Bombardier suspension
synthetic grease (P/N 293 550 033) or
an equivalent.
1
V02J01Y
1. Grease fittings
Inspection
A-Arms
Check these parts for damages
(cracks, excessive play or corrosion
pin-holes) at each 25 hours or at each
1250 km (800 m.). If one of these
damages is detected DO NOT USE
THE VEHICLE AND SEE AN AUTHO-
RIZED BOMBARDIER ATV DEALER.
WARNING
Never ride a vehicle with a defec-
tive A-arm.
Shock Absorbers
Inspect shock absorber for oil leaks
and fasteners for tightness. See an
authorized Bombardier ATV dealer as
necessary.
101
Hide quick links:
Advertisement
Table of Contents
