Table of Contents
Advertisement
Air Filter Removal
CAUTION:
Never remove or mod-
ify any component in the air box.
Otherwise,
engine
degradation or damage can occur.
The engine carburetion is calibrated
to operate specifically with these
components.
Remove seat.
Release clamps and remove air filter
box cover.
1
V07C0GY
1. Release clamps
Loosen clamp and remove air filter.
1
V07C0HY
1. Clamp
2. Air filter
_____________________
100
performance
1
1
2
Air Filter cleaning
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put the filter in to soak.
While filter soaks, clean inside the air
box.
Rinse the filter with warm water until
all cleaning solution disappears.
Then, let the filter dry completely.
When the filter is dried, re-oil with air
filter oil (P/N 219 700 340) or an equiv-
alent.
Air Filter Installation
Properly reinstall removed parts in the
reverse order of their removal.
Electrical
WARNING
Unless otherwise indicated, al-
ways turn ignition switch to the
OFF position before performing
any maintenance or repair on elec-
trical system.
Spark Plug
Removal
Unplug the spark plug cable.
Unscrew the spark plug one turn.
Clean the spark plug and cylinder head
with pressurized air if possible.
WARNING
Always wear safety goggles when
using pressurized air.
Unscrew spark plug completely then
remove it.
Installation
Prior to installation make sure that
contact surfaces of cylinder head and
spark plug are free of grime.
Hide quick links:
Advertisement
Table of Contents
