Optical Configuration; Gobos - Martin MX-10 User Manual

O
PTICAL CONFIGURATION

Gobos

The MX-10 accepts eight metal or glass gobos with an outside diameter of 22.5 mm and a maximum image diameter
of 17 mm. Complete gobo specifications are listed on page 33.
S T A N D A R D G O B O C O N F I G U R A T I O N
The MX-10 provides 8 gobos as shown below.
1
2
3
C U S T O M G O B O S
For optimum performance, custom glass gobos for the MX-10 should be made with the text, logo, and similar artwork
reversed on the coated side. Gobo types and dimensions are specified on page 32.
T O R E P L A C E A G O B O
1 Disconnect the fixture from AC power and allow it to cool.
2 Remove the front cover.
3 Turn the gobo wheel to access the desired position. Squeeze the
ends of the retention spring together and remove. Push the gobo out
from the back and remove.
4 Orient the gobo as shown in Figure 6 and insert. Secure the gobo
with the retention spring.
5 Replace the cover before applying power.
16
4 5
Figure 4: MX-10 gobo wheel
8
.
Position
1
2
3
7
4
5
6
7
8
6
MX-10
Gobo
Eclipse
Shark bar
Phat fan
Tail spin
Sun
Triangle
Oriental fire
Paint mix
Table 3: Standard gobos
Figure 5: Gobo replacement