Table of Contents
Advertisement
Connections
Audio Input Connections
The D AD3260 MiniModule is configured with
standard 75 Ohm BNC connectors for the AES3-id
Audio connections. Connection is self-explanatory.
We recommend the use of high quality audio
cable to reduce the risk of interference or errors
due to excessive cable attenuation.
Note. Due to the compact design of the module it
will be necessary to use a connection tool to
secure the BNC video connectors to the module.
Audio Output Connections
The D AD 3260 MiniModule is configured for Weco
type audio connections for the balanced AES3
audio. These connectors should be wired in
accordance with the table below. Please use high
quality screened cable to prevent the introduction
of noise and interference to the audio signals
(twisted pair suitable for balanced digital audio
signals).
Audio Connections
Weco 3 pin male connector
Reference Manual D AD 3260 Version1.1
1 2 3
Weco male connector
on module
Weco female
connector
(balanced)
Pin
Connection
Number
1
Positive (+)
2
GND
3
Negative (-)
1 2 3
Page 9
Advertisement
Table of Contents
