Electrical Installation; Stand Alone Operation - Lynx D AD 3260 BS Reference Manual

Electrical Installation.

Stand Alone Operation

The MiniModule requires the R PS 3001 power brick
option for stand-alone operation. Three versions are
available: R PS 3001 E for European markets, R PS
3001 U for the US markets or the desk power supply
R PS 3001-3. Please ensure you have the correct
power option for your region. The connection to
the module is made with a small 5-pin connector,
which has a twist bayonet securing system. Please
make sure the connection is solid and locked in
place. A strain relief is included within the module
to prevent excessive strain on the connection.
Signal connections should be made with care,
please ensure connections are correct and
compatible equipment is feeding / receiving the
signals from the module or damage can result.
!
Caution. Only use the optional Lynx R PS 1
power modules. Ensure the 5-pin power
connector is locked securely in place.
Caution. Care needs to be taken when
!
using the module in this way, if it is not
physically secured. Keep the module
away from the floor to avoid the risk of
someone stepping or tripping on the unit,
and locate the unit away from excessive
sources of heat and any sources or
moisture.
Reference Manual D AD 3260 Version1.1
Page 13