Snooze Alarm - Blaupunkt CR5WH Owner's Manual

CR5WH
4. Press MEMORY to confirm and save the current FM station.
LISTEN TO A PRESET FM RADIO STATION
Press MEMORY to select a preset number and play FM radio.
Note:
The digit display return to clock display if no buttons is pressed for 5 seconds.
SET ALARM TIMER
Make sure that you have set the clock correctly.
You can set two separate alarm timers. For the alarm sound, you can select the radio or the buzzer.
1. Press / FUNCTION to Clock mode.
2. Press and hold AL1/AL2 for two seconds.
· [0:00] Hour digit is blink.
3. Press HOUR to set the alarm hour and MINUTE to set the alarm minute.
4. Press AL1/AL2 again to select a sound source: RADIO or BUZZER.
· The Radio indicator is blink if radio source is selected and AL1 / AL2 indicator is light up.
· The buzzed indicator is blink if the buzzer sound is selected and AL1 / AL2 indicator is light up.
5. Press Time Set to confirm the ALARM TIMER.
6. Turn off the alarm.
· Press AL1/AL2 for two seconds and see the time is blink.
· Press AL1/AL2 for twice until the AL1/AL2 indicator is gone.
· Press Time Set to back clock.
* When the alarm sound is ring up, press
up again tomorrow when time is on.
Note:
please do not remove the power, otherwise the alarm will be disappeared base on no battery power
inside.

SNOOZE ALARM

When alarm sounds, press SNOOZE to activate the snooze time for 9 minutes.
· The AL1 / AL2 indicator keeps blinking.
SET SLEEP TIMER
This clock radio can switch to standby mode automatically after a preset period.
1. Press / FUNCTION to radio mode.
2. Press SNOOZE/DIMMER/SLEEP multi-function button repeatedly for 2 seconds to select the
sleep timer period (in minutes).
To deactivate the sleep timer, press SNOOZE/DIMMER/SLEEP multi-function button repeatedly
until back to OFF.
Sleep Timer period circle as follow:
/ FUNCTION to cancel the sound, and the alarm will ring
7