Sony BVM-L230 Operation Manual page 40

Menu
Manual Adjust
Original Value
Signal
Contrast Hold
Auto
40
Adjustment Menu
Function and operation ([
Adjusts the color temperature with the adjustment knob.
Note
This menu is not selectable when the contrast is set to less than 400.
When the item is selected, the color temperature adjustment display appears and the x and y
values of the color temperature data to be adjusted are displayed.
Note
The displayed chromaticity coordinates x and y are reference values and are not guaranteed
as absolute values.
When Contrast Hold is set to On, the adjustable item and the relevant knobs are as follows.
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
When Contrast Hold is set to Off, the adjustable item and the relevant knobs are as follows.
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
To adjust Contrast (contrast): CONTRAST knob
To reset Red, Green and Blue to the value before adjustment
Press the MANUAL button of BRIGHT, CHROMA or PHASE. The Red, Green and Blue are
reset to the value before adjustment.
To reset Contrast to the value before adjustment
Press the MANUAL button of CONTRAST.
Note
You cannot reset the setting after you press the ENTER (Ent) button.
To cancel adjustment
Press the MENU button. The adjustment data is cleared and the setting returns to the
previous value.
To confirm adjustment
Press the ENTER (Ent) button.
Sets the initial value.
Except for the XYZ format signal
You can select from D93, D65, D61, D56, D-Cine RGB, User1, User2, User3, User4 or
User5.
When D93, D65, D61, D56 or D-Cine RGB data is changed, they are displayed as D93*,
D65*, D61*, D56* or D-Cine RGB*.
For the XYZ format signal
You can select from D-Cine XYZ, User XYZ1, User XYZ2, User XYZ3, User XYZ4 or User
XYZ5.
When D-Cine XYZ data is changed, it is displayed as D-Cine XYZ*.
Not available in software version 1.1 or earlier.
Sets whether or not to adjust the color temperature and contrast (backlight) at the same time.
Off: Contrast is adjusted.
[On]: Contrast is not adjusted.
Adjusts the color temperature automatically by using an optional probe.
When the item is selected, the color temperature data to be adjusted is displayed.
When D93, D65, D61, D56 or D-Cine RGB data is changed, they are displayed as D93*,
D65*, D61*, D56* or D-Cine RGB*.
When Contrast Hold is set to Off, the color temperature data and contrast data are displayed.
The contrast data is displayed as the picture preset data Preset1 to Preset5 or Preset (D-
Cine) set in Picture Preset of the Input Configuration menu, or MANUAL. To change the
displayed data from the picture preset data to MANUAL, set the MANUAL button of
CONTRAST to on. To change the displayed data from MANUAL to the picture preset data,
set the MANUAL button of CONTRAST to off. To change the type of the picture preset data,
select from Preset1 to Preset5 or Preset (D-Cine) in the Picture Preset menu of the Input
Configuration menu.
For information about the Input Configuration menu, see
]: factory setting)
page 43
.