Controller Menu; Overview; Menu Function And Operation - Sony BVM-L230 Operation Manual

Controller Menu

Overview

This menu is for the network setting and assigning the function to the function button of the controller.
When Controller is selected, the following menu is displayed.
iController
Network B
B
Function Key
Monitor ID Display: xxx

Menu Function and Operation

Menu
Network
Network Setting
IP Address
Subnet Mask
Default Gateway
Address
Cancel
Confirm
SNMP Setting
Protocol Setting
Function Key
Function and operation ([
Sets the remote control function of the network.
For the setting value, consult the network administrator.
Sets the IP address, subnet mask and default gateway.
Sets the IP address. [192.168.000.100]
Note
When the NETWORK switch is set to PEER TO PEER, the IP address is set to
"192.168.0.100" regardless of the display.
When the NETWORK switch is set to LAN, the IP address is set to the displayed one.
Sets the subnet mask. [255.255.255.000]
Note
When the NETWORK switch is set to PEER TO PEER, the subnet mask is set to
"255:255:255:000" regardless of the display.
When the NETWORK switch is set to LAN, the subnet mask is set to the displayed one.
Sets whether or not to set the default gateway ([Off] or On).
Sets the address of the default gateway. [---.---.---.--- (no setting)]
Cancels the changed or confirmed setting.
Saves the changed or confirmed setting.
Not available in software version 1.1 or earlier.
Not available in software version 1.1 or earlier.
Assigns the function to the function buttons.
]: factory setting)
59
Controller Menu