Displaying The Area Marker Or Aspect Marker; Displaying The Audio Level Meter - Sony Trimaster PVM-L2300 Operation Manual

Displaying the Area
Marker or Aspect Marker
The monitor is equipped with two area markers and center
marker as the safe area marker and aspect marker for
confirming the picture angle.
1
Input the signal.
2
Select the channel.
3
Set the marker preset data (Marker1 to Marker5) to
display in the Marker Preset menu (page 55) of the
Input Configuration menu.
4
Set the marker to display in the Marker Setting menu
(page 59) of the Display Function menu for the preset
data set in step 3.
5
Select the marker mode (Marker, Aspect Marker, Area
Marker 1 or Area Marker 2) with the function button*
of the controller or in the Function Switch menu of the
Display Function menu and set it to On.
For details on the Function Switch menu, see the
"Function Switch" (page 63) of the Display Function
menu.
* Marker, Aspect Marker, Area Marker 1 or Area Marker 2 is
assigned to the function button of the controller in the
Function Key menu (page 79) of the Controller menu.
When the MARKER button is set to on
All the markers that are set to On in the Marker Setting
menu of the Display Function menu are displayed.
The MARKER button lights.
To display the aspect marker, area marker 1 or
area marker 2
Set the button of the marker that you wish to display
(ASPECT MARKER, AREA MARKER 1 or AREA
MARKER 2) to on.
The MARKER button and the pressed button light.
To cancel the marker display
Set the MARKER button to off.
90
Displaying the Area Marker or Aspect Marker / Displaying the Audio Level Meter
Displaying the Audio
Level Meter
The audio level of the embedded audio signals
superimposed on the SDI signals is displayed by installing
the optional input adaptor (BKM-250TG).
Note
As the audio level meter is superimposed on the video
signal, the audio level meter may be invisible partially
because of the scan mode setting of the monitor.
1
Input the SDI signal.
2
Select the channel.
3
Set the audio level meter in the Audio Level Meter
menu (page 71) of the On Screen Set menu of the
System Configuration menu.
To set the audio channel
Set in the Audio CH menu.
CH1-CH8: Selects when the channel 1 to 8 is selected.
CH9-CH16: Selects when the channel 9 to 16 is
selected.
To set the display position
Set in the Position menu.
Bottom: Displays at the bottom of the window.
Top: Displays at the top of the window.
To set the transparency of the background
Set in the Transparency menu.
Black: Sets the background in black.
Half: Sets the background in translucence.
To set the peak hold
Set in the Peak Hold menu.
Off: The peak hold does not function.
Auto: The peak hold is automatically canceled after
about 1 second.
Manual Reset: The peak hold is canceled manually.
To cancel the peak hold, select ALM Hold Reset (page
66) in the Function Switch menu of the Display
Function menu or set ALM Hold Reset to on by
pressing the ALM Hold Reset button* of the
controller.
4
Set Audio Level Meter (page 65) to On in the Function
Switch menu of the Display Function menu or by
pressing the Audio Level Meter button* of the
controller.
The audio level meter is displayed.