Sony BVM-L230 Operation Manual page 56

Menu
Power On Status
Default CH
On Screen Set
Input Information
Format
Position
CH No
Position
CH Name
Position
Scan Mode
Position
Film Cadence
Position
Marker Information
Password
Date/Time
Scan Mode Skip
Maintenance
56
System Configuration Menu
Function and operation ([
Sets the input channel when the power is turned on.
[Last]: Sets to the channel that was selected at the time the power was last turned off.
CH: Sets to the channel number specified in Default CH.
Selects the channel (01 to 30) when the Power On Status is set to CH. [01]
Sets the items for the screen display.
Sets the display of the input information.
Sets the display mode of the signal system.
[Auto]: Disappears after being displayed for a while.
On: Always displayed.
Off: Not displayed.
Sets the display position for the signal system.
You can select from Top Left, Top Center, Top Right, [Bottom Left], Bottom Center or
Bottom Right.
Sets the display mode of the channel number.
[Auto]: Disappears after being displayed for a while.
On: Always displayed.
Off: Not displayed.
Sets the display position for the channel number.
You can select from Top Left, Top Center, [Top Right], Bottom Left, Bottom Center or
Bottom Right.
Not available in software version 1.1 or earlier.
Not available in software version 1.1 or earlier.
Sets the display mode of the scan mode.
[Auto]: Disappears after being displayed for a while.
On: Always displayed.
Off: Not displayed.
Sets the display position for the scan mode.
You can select from Top Left, Top Center, Top Right, Bottom Left, Bottom Center or
[Bottom Right].
Not available in software version 1.1 or earlier.
Not available in software version 1.1 or earlier.
Not available in software version 1.1 or earlier.
Not available in software version 1.1 or earlier.
Not available in software version 1.1 or earlier.
Not available in software version 1.1 or earlier.
The menu for the Sony service representative is displayed.
]: factory setting)