Displaying The Area Marker Or Aspect Marker - Sony bvm-l230 Operation Manual

CAPTURE
Save: ENTER Cancel: MENU
To hide characters on the monitor, set the CHAR OFF
button to on. As the characters are hidden, it becomes
easy to confirm the still picture. To display the
characters, set the CHAR OFF button to off.
3
Press the ENTER (Ent) button.
The display of the captured still picture is cleared and
saving in the "Memory Stick" of the captured frame
starts.
The "In progress " is displayed and "
x
during data saving. (It may take some time to write the
data.)
The file of the captured frame is automatically named
and the file name is displayed on the screen during file
saving.
Note
The monitor is not operated until the saving is
completed.
To load the captured frame
Press the Capture Load button* of the controller or select
Load in the Capture menu (page 64) of the Display
Function menu, and then the file name.
To cancel the captured frame display, select any one of
channel numbers 1 to 30.
* Capture Load is assigned to the function button of the controller in
the Function Key menu (page 80) of the Controller menu.
Displaying the Area
Marker or Aspect Marker
The monitor is equipped with two area markers and center
marker as the safe area marker and aspect marker for
confirming the picture angle.
1
Set the marker to display to On in the Marker Setting
menu (page 59) of the Display Function menu.
2
Input the signal.
3
Press the function button of the controller.
When the MARKER button is set to on
" flashes
x
All the markers that are set to On in the Marker Setting
menu of the Display Function menu are displayed.
The MARKER button lights.
To display the aspect marker, area marker 1 or
area marker 2
Set the button of the marker that you wish to display
(ASPECT MARKER, AREA MARKER 1 or AREA
MARKER 2) to on.
The MARKER button and the pressed button light.
To cancel the marker display
Set the MARKER button to off.

Displaying the Area Marker or Aspect Marker

91