Display Function Menu
Overview
This menu is used to set the function related to the picture display.
When Display Function is selected, the following menu is displayed.
iDisplay Function
Marker
B
Picture&Picture
B
Pixel Zoom
B
Gamut Error Display B
Capture
B
Internal Signal
B
Function Switch
B
Menu Function and Operation
Menu
Marker
Marker Preset
Aspect Blanking
Aspect Blanking
Mode
Aspect Marker
Aspect Marker
Aspect Mode
Aspect
Line
Color
Bright
50
Display Function Menu
Function and operation ([
Sets whether or not to display the marker when the MARKER button is pressed, and the
display mode.
Sets the marker preset data.
You can select from Marker1 to Marker5. [Marker1]
Sets the display of the blanking outside the area of the aspect marker.
Sets whether or not to set the blanking.
[Off]: Blanking is released.
On: Blanking.
Sets the blanking mode when Aspect Blanking is set to On.
You can select from Black (blanking) or [Half] (half blanking).
Sets the aspect marker display.
Sets whether or not to display the aspect marker when the MARKER button is pressed ([Off]
or On).
Sets the aspect ratio of the aspect marker.
You can select from [16:9], 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.85:1, 1.66:1, 1.896:1 or
Variable.
Sets the aspect ratio of the aspect marker when Variable is selected in Aspect Mode.
Set to 1.00:1 to 3.00:1. [1.78]:1
Sets the thickness of the aspect marker.
You can select from [Thick] (thick) or Thin (thin).
Sets the color of the aspect marker.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta).
Sets the luminance of the aspect marker.
You can select from [90IRE] (bright) or 40IRE (dark).
]: factory setting)