Using The Cooktop Burners - Belling BEL FS50EDOC BLK Operating And Installation Instructions

BEL FS50EDOC BLK / BEL FS50EDOC WHI

4.3. USING THE COOKTOP BURNERS

The hob part of the cooker is operated by 4 control knobs, one for each burner. Each
control knob has 7 positions on the control panel for a more precise heat control.
Position "0" is the off position and the other 6 positions are ideal for different cooking
styles. See our recommendations below:
1: This keeps heat at a constant and minimum temperature which is ideal for heating
soups and other liquids.
2-3: These two middle heat positions are good for simmering and heating foods.
4-5-6: These settings are ideal for boiling, frying and cooking larger quantities of
food.
The knob rotation direction may differ according to the product specification.
We recommend you use pans with a flat base for an equal heat dispersion to the
food.
Make sure the cookware is a suitable size for the size of the hob heating element and
that the pan is centred on the heating element for the most efficient usage of the hob.
WRONG
WRONG WRONG
CORRECT
pot buttom does not sit well
pot bottom is round
pot buttom is small
After using any hob,please make sure that it is switched off.
Never touch any heating element after it has been turned off because it keeps its
heat for a while afterwards.
Some ceramic models may have hot surface warning light.
Clean the cooker with a wet cloth after use. Stubborn marks can come off easier with
water and cleaning detergent.
13