Fan And Ring Heating Function; Bottom Heating Function - Belling BEL FS50EDOC BLK Operating And Installation Instructions

Fan and ring heating function

This function spreads heated air equally in the oven and it is appropriate for single or
more trays cooking.
Turn your main oven's switch and set the temperature. If available, adjust the digital
programmer. Place the tray on the grid. It is recommended to preheat for 10 minutes.
If you have two trays of food that you will cook in your oven; you must use that heat for
your oven, heat of which of the heats that is appropriate for your food while adjusting
the cooking heat. Cooking two trays of food requires additional cooking period
according to the single tray cooking. In general, foods in two trays are not cooked at
the same time. So, take the tray that you observed that is cooked, from the oven, go
on cooking for the other tray of food. As there will be heat transfer between two trays
during the cooking of two trays of food, the cooking quality will be lower than the single
tray. While cooking double trays, you can get a better cooking result by changing the
places and ways of trays if needed. For details, please see the cooking table.
At the end of cooking period, as in all other cooking processes; turn the top oven
switch and thermostat switch off. Take the cooking tray out and put it onto a safe
place.Keep the children away from hot oven during and after cooking, until it is cool
completely.
Top and bottom heating function
During this function, the top and bottom heating elements ensure that food is cooked
equally top and bottom. To operate, turn the main oven's control knob until you see
the relevant symbol, set the desired temperature and let it pre-heat for 10 minutes. To
see what you can cook on this function, see the cooking table. Make sure you turn the
top oven knob to "0" after cooking, take the cooking tray out and put it in a safe place to
cool. Keep children away from the hot oven during and after operating, until it has
cooled completely.

Bottom heating function

This function is appropriate for heating food rather than cooking it. Turn your main
oven's switch as it will show the sign of this function and place the tray on the grid.
At the end of heating period, turn the main oven switch off. Take the cooking tray out
and put it onto a safe place. Keep the children away from hot oven during and after
heating, until it is cooled completely.
Top heating function
This function is appropriate for frying the upper side of allready cooked food and
20