Semi-Automatic Programming According To Finish Time - Belling BEL FS50EDOC BLK Operating And Installation Instructions

6. A few seconds after you have set the time, the current
day's time will appear again on the screen.
7.The "A" symbol stops flashing, the [cooking symbol]
will appear and both will remain lit to show the time is set.
8. The oven will continue to operate on the set function
and the timer will begin.
9. Once the set time is up, the oven will stop operating
and will give an audible warning.
10. The "A" symbol will begin to flash
11. Press any button to stop the audible warning
12. Turn the function and thermostat control knobs to "0"
13. You can now manually operate the oven again
Semi-Automatic Programming according to Finish
A
Time
En d
Use this programme if you want your cooking to cook for
a certain duration but also finish at a certain time of day.
1. Put the food you want to cook in the oven.
2. Use the control knobs to select the cooking function
and temperature you want depending on the food.
3. Keep pressing MODE until you see "End" appear on
the screen and the symbol "A" and the day's time is
flashing.
4. Adjust the time to the time of day that you want the
cooking to finish by using the (+) and (-) buttons.
5. You can set a time up to 10 hours after the current
day's time.
6. A few seconds after you have set the time, the current
day's time will appear again on the screen.
7. The "A" symbol stops flashing, the will appear and
both will remain lit to show the time is set.
8. The oven will continue to operate on the set function
and the timer will begin.
9. Once the set time is up, the oven will stop operating
and will give an audible warning.
10. The "A" symbol will begin to flash
11. Press any button to stop the audible warning
12. Turn the function and thermostat control knobs to "0"
13. You can now manually operate the oven again.
If you want to cancel and return the oven to manual
operation, press the (+) and (-) buttons at the same
time.
16