Using Your Digital Timer - Belling BEL FS50EDOC BLK Operating And Installation Instructions

4.4 USING THE OVEN

4.4.1 Using your digital timer

A
Setting the clock:
You must set the clock before you can use the oven.
·When your oven is connected to a power supply for the
first time, the symbol (A) in the corner and the clock
showing 00:00 will be flashing.
·Press the (+) and (-) keys at the same time and the
symbol [insert symbol here] with a black dot beneath it
will appear on the screen.
·When the dot begins to flash, you can set the time by
using the (+) and (-) buttons.
·When you finish setting the time, the dot will stop
flashing.
When you first connect the oven to the power supply and
then control display starts to flash, you cannot operate
the oven via these buttons until you have set the time.
When you have set the time and the [insert symbol]
symbol appears, you can then operate the oven.
In the event of a power cut, the time will go back to 00:00,
so remember to readjust it again.
14
BEL FS50EDOPC STA