Danger Zone - Agria 5900 BISON Operating Instructions Manual

4. Commissioning and Operation
4
4 4

danger zone

Operating the Machine
W
Start the engine as specified in chapter "Starting
I the Engine".
Wear individual protective ear plugs and solid
shoes.
For operation with PTO-powered attachments:
Switch on PTO using the PTO shifting mechanism
(B/7).
Pull slightly clutch lever (B/5), unlock pawl (B/6)
and slowly let go while pressing the throttle.
W
not always reached – the implement will possibly
start directly!
Set driving speed with the driving lever (B/10) or
the twist grip (B/12) according to the conditions and
requirements.
Changing the driving direction from forward to
reverse:
Slowly move driving lever (B/10) or twist grip (B/12) to
the rear bottom.
Proceed vice versa for direction change from reverse
to forward.
W
Danger Zone
W
Hydrostatic Tool Carrier Bison
Check safety circuit function - Only operate
the machine if, safety circuit works!
Carefully engage the clutch, the exact 0-
position of the twist grip or driving lever is
Never leave tool carrier unattended with the
engine running.
Keep out of the machine's danger zone during
starts and operation.
4
33