Danger Zone; Working On Slopes - Agria 3100 Operating Instructions Manual

4. Commissioning and Operation

Danger zone

max. 10°
(18%)
Danger zone
Keep out of the machine's danger zone
during starts and operation!
If the operator should notice that a person or
animal is staying within this area, the machine
must be shut down without delay and must not
be operated again before the area is free
again.
The user is liable to third parties working
within the working range (the whole of the
area to be worked upon).
Danger zone power hoe

Working on Slopes

Depending on the state of the ground
W
(vegetation, dampness ...), special
footwear must be worn so that the opera-
tor does not slip or fall.
Work with the machine always transversely
the slope but never up- or downslope
because the machine can roll over by
sudden thrust of the rotary hoe or can be
pushed away downslope by the rotary hoe.
When hoeing and milling in difficult soils (stony,
hard etc.) a jerky movement of the machine can
be affected, therefore special care is required.
Single Wheel Hoe agria 3100
V S
2 m 1 m
4
27