Using The Remote Control; Vehicle Presets (Only With Remote Starter); Heater; Windshield Wipers, Radio & Headlights - Directed AS-RFK2300 User Manual

Two-way fm led remote system
Table of Contents

Advertisement

Using the Remote Control

Your remote system is equipped with a 5-button multi-channel remote control. The functions of the
transmitter are as follows:
LOCK (LED 1): Locks the
TRUNK (LED 3): Opens
the TRUNK.
N.B.: Pressing
then the UNLOCK button will activate the AUX 2 output.
Pressing

Vehicle Presets (only with remote starter)

Heater

When leaving the vehicle it is recommended to preset the accessory controls in preparation for the
next remote start. Settings for the blower motor (fan), front and rear, should not be left on HIGH. It
is recommended to leave the settings on LOW or MEDIUM instead.
Windshield Wipers, Radio & Headlights
Certain vehicles require the radio and / or windshield wipers and / or headlights circuits to become
energized while running under remote start. When leaving the vehicle you must ensure that the
windshield wipers and headlights switches are OFF. Leaving the headlights switch ON in certain
types of vehicles could cause them to remain ON even after remote starter shutdown, resulting in a
dead battery.
P.4
doors.
SHIFT: This button
serves as a second function
button. In combination with the
other four buttons, this button
allows to assign different
functions to those buttons.
then the LOCK button will activate the AUX 1 output.
UNLOCK (LED 2):
Unlocks the doors.
START (LED 4): Remote
starts the engine.
User Guide

Advertisement

Table of Contents
loading

Table of Contents