Steering Handle - Agria 400P Operating Instructions Manual

3. Devices and Operating Elements
G
3
H
26 agria Multi-Purpose Machine 400P

Steering Handle

Steering handle height adjustment
Remove the knob screw (2) from the
square clamping piece (3) and remove
it from the steering bar joint.
Adjust the steering handle to the de-
sired height and fit it into proper boring
of the steering bar joint.
Insert the knob screw and bolt it
down to the clamping piece (3). (En-
sure that nose of clamping piece (3)
locks into the long hole the steering bar
joint).
Steering handle side adjustment
Loosen knob screw (1) until all
notches are free.
Swivel the steering handle to the
desired position and fit into proper
notch.
Re-tighten knob screw.