Clutch; Gear Shifting; Steering Handle - Agria farmstar 1600 Operating Instructions Manual

3. Devices and Operating Elements

Clutch

The machine is equipped with a bevel
clutch which is actuated via the clutch
lever (A/9 or C/9).
With the clutch levers pulled the driveline
is cut and the engine stops driving the
power hoe.
When the machine is decoupled you can
lock the clutch lever with pawl (A/10 or
C/10).
Petrol Engine Version
3
A/10
To prevent the clutch from slipping
during operation the lever is set to a free
play (see service and maintenance).
After the first operating hour the clutch
free play needs to be checked and if
necessary readjusted (see service and
maintenance).
Do not park the machine with
I
the clutch pulled and the en-
gine running. This may damage the
clutch release bearing.
Ensure the lever is pulled and locked
(pawl is locked in place) when you park
the machine with the engine stopped,
otherwise clutch problems might arise
due to corrosion.
22
Diesel Engine Version
C/9
C/10
A/9
agria Power Hoe Farmstar 1600

Gear Shifting

The gears 1, 2, and reverse are shifted
with the gear shift lever (A/11 or C/11).
There is a neutral position "0" between
the individual gears.
To engage the reverse gear, pull the
gearshift lever to the rear against the
resistance of a pressure spring and hold
it in this position.
The position of the shift lever in the shift
gate (A/12 or C/12) indicates the
selected gear.

Steering Handle

Steering Handle Height and
Side Adjustment
Undo the tommy nut (5) until the teeth
are exposed.
Move the handlebars (4) to the proper
position.
Re-tighten the tommy nut (5).