Table of Contents
Advertisement
3. Devices and Operating Elements
B/1
A/6
Steering Handle
Do never adjust operating handles
W
during working - risk of accidents!
Steering Handle Height Adjustment
Unfix ball handle levers
the ratchets
Bring left and right steering handle to the de-
sired height and introduce into the respective
ratchet.
Tighten ball handle levers
Steering Handle Lateral Adjustment
From its normal position (centre position), the steer-
ing handle can be turned by about 30° to the left or
right.
Pull ball handle (B/1) upwards and keep it in
position; then turn steering handle to the left or right
into the desired positon.
Release ball handle and slightly move steering
handle to the left and right until the fixing bolt is
engaged.
Eyelet for Loading
The hooked yoke (A/6) is meant for loading the
machine and for suspending the retaining rope for
works on slopes.
Do not use any loading devices with sharp edges
(e.g. sharp-edged hooks, lugs etc.).
Never walk or remain under moving loads. Dan-
ger!
Fixing Points
For towing away, recovering and tying down and to
ensure a safe transport, use the
fixing points
at the connection flange and engine food guard.
agria Tool Carrier 5500 Grizzly
on either side until
are free.
again.
3
27
Advertisement
Table of Contents
