Central Brake; Steering Handle Adjustment - Agria 5500 KL Operating Instructions Manual

3. Devices and Operating Elements
Central Brake (optional)
To slow down or park the machine on
hilly ground, use the combined central
hand brake.

Central Brake

Clockwise swivel eccentric lever (B/10)
backwards – brakes act on both drive-
wheels.
Release eccentric lever and the lever
swivels back to original position – brake
is released.
Hand Brake
Clockwise swivel eccentric lever (B/10)
backwards beyond the dead centre.
Eccentric lever automatically comes to
a stop – both drive-wheels are blocked.
To release hand brake, swivel eccentric
lever back to original position – brake is
released.
Edition 03.95 Municipal Tool Carrier 5500 KL
Steering Handle Height
Adjustment
1. Loosen both lock nuts and hexago-
nal screws (A) until notches (B) are free.
2. Adjust left and right steering handles
to desired height and lock into appropri-
ate notch.
3. Tighten lock nuts and hexagonal
screws.
Steering Handle Side
Adjustment
Pull up ball handle (B/8) and hold. Swivel
steering handle left or right (release ball
handle while doing so) until bolt locks
into place (check).
Note: There is only one swivel position
on the left and right respectively.
19