Paper Jam Inside Of Machine - Samsung MultiXpress M537x series Service Manual

► Error Code
M2–1111
M2–1114
► Error message

Paper jam inside of machine

► Symptom
Paper jam has occurred at feed sensor.
► Troubleshooting method
1) Turn the machine off then on.
2) Open the side cover. Remove the jammed paper.
3) If the problem persists, check the followings.
4) Check that the registration sensor actuator moves freely and is not damaged. If necessary, install a new registration
sensor actuator assembly.
5) Check the connection between the registration sensor and on the main board. If necessary, install a new registration
sensor.
6) Check if the registration roller is damaged. If necessary, replace the registration roller.
7) Check that the feed sensor actuator moves freely and is not damaged. If necessary, install a new feed sensor
actuator assembly.
8) Check the connection between the feed sensor and on the main board. If necessary, install a new feed sensor.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-155