Table of Contents
Advertisement
Reassembly
.
Tabs
A
13 Location Side
C
Figure 13 Disassembling and Reassembling Accessory Plug - Disassembly
1.
Insert the pin housing back into the shell in the opposite way it was removed. Be
certain that the 13-location side of the pin housing is facing the flat side of the shell.
Also be sure that the pin housing snaps securely into the shell and is not cocked in
the shell.
2.
Install the cover back onto the accessory plug by snapping the cover over the tabs
and pressing down.
Cover
(In Place)
Pin
Housing
Location Numbers
(Visible only when
Flat Side
wings are open)
Shell
Cover
(Removed)
B
Pin
Housing
Wing
Wing
D
Dash Mounting
15
Hide quick links:
Advertisement
Table of Contents
