Accessory Plug Removal; Speaker Connection; Figure 28 Disassembling And Reassembling Accessory Plug - Disassembly; Figure 29 Speaker Connection - Motorola Dimetra MTM300 Installation Instructions Manual

Accessory Plug Removal

Tabs
A

Speaker Connection

28 Remote Mounting
The accessory plug is not needed in case of remote mount installation.
1. Squeeze tabs together (see , A), and remove the cover from the accessory plug (see
Figure 28, B).
2. Using thumb pressure from the bottom of the shell, push the pin housing up and out
of the shell (see Figure 28, C).
3. Remove the speaker wires from the accessory plug.
Cover
(In Place)

Figure 28 Disassembling and Reassembling Accessory Plug - Disassembly

Connect the pins of the wires to the junction box terminals 1 and 2.
Cover
(Removed)
B
1
2
JUNCTION BOX TERMINAL

Figure 29 Speaker Connection

13 Location Side
Pin
Housing
Flat Side
Shell
C
SPEAKER