Optional Hln6372 Keylock Installation; Figure 23 Connections To Junction Box; Figure 24 Optional Keylock Installation; Table 4 Mechanical Parts For Fln2451 Junction Box And Fln2483 Data Junction Box - Motorola Dimetra MTM300 Installation Instructions Manual

Optional HLN6372 Keylock Installation

24 Remote Mounting
4. Connect the Data cable to the junction box (if required).
Screws for securing the
junction box to the
6
mounting surface
Control Head-to-Junction Box
Connection

Figure 23 Connections to Junction Box

Table 4 Mechanical Parts for FLN2451 Junction Box and FLN2483 Data Junction Box

Callout No. Motorola Catalogue No.
1 0300139773
2 1586069C01
3 1586070C01
4 5486489F01
5 FLN8930A
FCN5969B
6 0300140338
7 3108509G22
To install optional Keylock HLN6372 (see Figure 24), proceed as follows:
1. Place the two keylocks on each side of the transceiver mounting trunnion to cover
the two wing screws holding the transceiver.
2. Secure the keylocks with the lock key.

Figure 24 Optional Keylock Installation

Transceiver-to-Junction Box
Connection
2
Data Connection (available only
with Data Junction Box FLN2483)
Screw (4)—not shown
Base Housing
Cover Housing
Raw Material Label
PCB Assembly—not shown
PCB Assembly, Data Junction Box—not
shown
Screw (4)
Connector
Wing Screw
Key
Keylock
HLN6372
Lock
Accessories
Connection
7
4
Visor Microphone
Connection
3
Description
Mounting
Trunnion