Table of Contents
Advertisement
5. Maintenance
5
1 Lock nut for stop buffer
2 Stop buffer
3 Adjustment nut for steering handle central
mounting
5 5
5
44
Steering Handle Locking Bolt
J, B
Occasionally lubricate nipple on locking
bolt of steering handle with Bio-lubrica-
tion grease. Lubricate at least once a
year and after cleaning with air-com-
pressed water jets.
Grizzly compact, comfort
(4) 50 h
Steering Handle Central Mounting
Re-tighten adjustment nut (3) with 20
20 Nm
Nm after the first 4 operating hours, then
after every 50 operating hours.
Steering Handle Pendulum Stop
This steering handle bearing provides
optimum dampening, when the two stop
buffers are adjusted to a play of A = 0.5
mm (in position zero, with no load on
steering handle) between stop plate and
buffers.
However, the pendulum stop can also
be set to provide a rigid steering handle
(without play).
Adjustment:
the above stated play "A".
agria Tool Carrier 5500 Grizzly
Loosen hexagonal nuts (2).
Adjust stop buffer (1) by turning it to
Re-tighten hexagonal nuts (2) (lock)
Advertisement
Table of Contents
