Important Building Notes; Common Abbreviations; Ordering Replacement Parts - GREAT PLANES Ju-87 Stuka Instruction Manual

IMPORTANT BUILDING NOTES

• There are two types of screws used in this kit:
Sheet metal screws are designated by a number and a
length. For example #6 x 3/4".
This is a number six screw that is 3/4" long.
Machine screws are designated by a number, threads per
inch, and a length. For example 4-40 x 3/4".
This is a number four screw that is 3/4" long with forty
threads per inch.
• When you see the term test fit in the instructions, it means
that you should first position the part on the assembly
without using any glue, then slightly modify or custom fit the
part as necessary for the best fit.
• Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use. When a
specific type of adhesive works best for that step, the
instructions will make a recommendation.
To order replacement parts for the Great Planes Stuka ARF, use the order numbers in the Replacement Parts List that
follows. Replacement parts are available only as listed. Not all parts are available separately (an aileron cannot be
purchased separately, but is only available with the wing kit). Replacement parts are not available from Product Support,
but can be purchased from hobby shops or mail order/Internet order firms. Hardware items (screws, nuts, bolts) are also
available from these outlets. If you need assistance locating a dealer to purchase parts, visit www.greatplanes.com and
click on "Where to Buy." If this kit is missing parts, contact Great Planes Product Support.
Order Number
GPMA2220......................................Wing Kit
GPMA2221......................................Fuse Kit
GPMA2222......................................Tail Set
GPMA2223......................................Cowl
GPMA2224......................................Canopy
GPMA2225......................................Landing Gear
GPMA2226......................................Wheel Pants

ORDERING REPLACEMENT PARTS

Replacement Parts List
Description
Missing pieces ......................Contact Product Support
Instruction manual.................Contact Product Support
Full-size plans .......................Not available
• Whenever just epoxy is specified you may use either
30-minute ( or 45-minute) epoxy or 6-minute epoxy. When
30-minute epoxy is specified it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
• Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.

COMMON ABBREVIATIONS

Fuse = Fuselage
How to Purchase
Contact Your Hobby
................
Supplier to Purchase
These Items
4
Stab = Stabilizer
Fin = Vertical Fin
LE = Leading Edge
TE = Trailing Edge
LG = Landing Gear
Ply = Plywood
" = Inches