Description Of The Washing Machine; Before The First Wash Cycle - Whirlpool WWDC-7444 Instructions For Use Manual

DESCRIPTION OF THE WASHING MACHINE

1. Worktop
2. Control panel
3. Detergent dispenser
4. Service plate (inside the door)
5. Door
6. Pump access with filter and emergency drain hose (if available) behind the plinth
7. Adjustable feet
DOOR
To open the door, hold the door handle and pull the door. Close the door by pressing it without
excessive force until it clicks shut.

BEFORE THE FIRST WASH CYCLE

To remove any residual water used in testing by the manufacturer, we recommend that you carry out
a short wash cycle without laundry.
1. Open the tap.
2. Close the door.
3. Add a small amount of detergent (maximum 1/3 of the quantity the detergent manufacturer
recommends for lightly soiled laundry) to the main wash chamber
4. Select and start programme "Synthetics" at 60 °C (see separate programme chart).
Depending on the model:
EN 4
of the detergent dispenser.