Calibration - Sartorius U 3600, Installation And Operating Insctructions

Calibration.

- is only possible with an accurate calibration weight.
Please refer to "Accessories."
Clear the pan and depress the QAL button for at least three
seconds until the calibration weight appears in the display.
Place the calibration weight in the center of the pan.
Now the weight unit symbol appears, and a beeper Signals the
end of the calibration procedure.
You can disable the calibration function – see "Balance operat-
ing program". (The function is enabled whenever the balance
operating program is in the "C" mode).
9