Technical Data; Electrical Connection - AEG BMT 60 Operation And Installation Instructions Manual

8
1. Installation instructions
Handing over the unit
Explain to the user how the unitworks and
familiarise him or her with its use.
- Advise the user about possible hazards
(high water temperature)
- Hand over these instructions, to be kept
in a safe place.
1.9 Service note
When carrying out any work,
isolate the unit from the mains
and shut off the water connection.
- Clean the filter
Disconnect the union nut, remove washer ,
filter and clean.
Re-assemble in reverse order.

Technical Data

Type
System design
Rated pressure
Nominal capacity
Dimension (H x W x D)
Weight (empty)

Electrical connection

Power Regulating device
Rated power (kW) - Rated current (A)
Reccommended circuit breaker
Reccommended cable size
Water connections (surface installation)
for the qualified installer
1.10. Warning
temperatures may be reached. Children,
especially, should be kept from the fitting
due to the risk of scalding.
L.
mm.
kg.
4 steps control (Off - Low - Med -High)
220 V
230 V
(A)
(Sqmm.)
When selecting the temperature
at the draw off fitting, high water
BMT 60
Closed
10 bar/1.0Mpa
< 0.25
220 x 170 x 80
1.4
1/N/PE~220...230 V.
kW - A
6.0 - 27.3
6.6 - 28.7
30
6.0
G ½"