Prepare The Fireplace; Position The Fireplace - kozy heat TMT-3875 Installation And Operating Manual

PREPARE THE FIREPLACE

STAND-OFF ASSEMBLY & INSTALLATION - Figure 8.
1. The top stand-off brackets must be formed and correctly positioned prior to positioning the fireplace into the framed opening.
2. The top stand-off brackets are attached to the top of the fireplace in a flat form when the fireplace is shipped.
3. Remove the screw securing each stand-off bracket and remove from the fireplace.
4. Remove the remaining (2) screws under the stand-off brackets and set aside.
5. Form each stand-off as shown.
6. Re-attach the stand-off brackets to the top of the fireplace using the
screws removed in steps #2- #3 above.
Figure 8

POSITION THE FIREPLACE

1. Place the fireplace into position. Figure 9.
Figure 9
NOTE: See-Thru installation shown
CAUTION: STAND-OFFS ARE NOT LOAD BEARING.
68"
33 1/2"
Page 11