Display Adhesive Assembly - Motorola Moto E Service & Repair Manual

ASSY,HSG,REAR,STYX,LICORICE
ASSY,HSG,REAR,STYX,WHITE
DIE CUT,ADHES,MN LENS
1. Remove the Audio Port and Front-Facing Imager
liners from the Housing.
2. Place the Cleaning Cover on the Housing.
3. Use cotton swabs and ISP Alcohol to clean the
Display bonding ledge. The Display bonding
ledge highlighted in the photo.
4. Wait for the ISP Alcohol to dry completely.
Do not use the same cotton swabs to clean with
ISP Alcohol and apply 3M AP-111 Adhesion
Promoter. The Display will not properly adhere to
the Housing if the cotton swabs are reused. The
cotton swabs may be reused for 2 applications
then must be thrown away.
5. Use cotton swabs to apply 3M AP-111 Adhesion
Promoter to the Display bonding ledge.
Clean the Cleaning Cover daily with ISP Alcohol to
prevent buildup and flaking of Surface Promoter.
6. Wait for the 3M AP-111 Adhesion Promoter to
dry.
1
4
1
2
2
3