Motorola Moto E Service & Repair Manual page 31

3. When the adhesive has been freed, slightly lift
the Display from the Housing.
To avoid damage to the Display Flex, do not lift
the Display any higher than necessary to
disconnect the Battery and Display Flex.
4. Use the Tweezers to disconnect the Battery.
To avoid damage to the Display, the Battery must
be disconnected before disconnecting the Display
Flex.
5. Use the Tweezers to remove the Kapton Tape
from the Display Flex ZIF Connector Door.
After you remove the Kapton Tape, you
cannot reuse it.