Battery Cleaning - Motorola Moto E Service & Repair Manual

Failure to adhere to Safety Critical Note(s) may increase
risk of rupture, burning, or failure to function safely when
used by the customer. Refer to the Battery Safety
Guidelines.
1. Use the Blackstick and ISP Alcohol to remove
any adhesive residue from the Battery.
To prevent damage, do not allow sharp tools or
screws to come in contact with the Battery.
2. Inspect the Battery to verify it is not creased,
crushed, or punctured.
3. If the Battery foil pack is wrinkled, slide the flat
edge of the Blackstick against the foil pack to
smooth out all wrinkles.
Handle the Battery Pack with care. If dropped to the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.