1
02/25/2015
2
04/24/2015
3
05/21/2015
Initial release.
Updated Tools Required for Disassembly and Display Removal (With Display
Removal Fixture) sections with photos of current fixture.
Added subheadings for Lens Removal Fixture Setup, Pre-Heat Method A,
Pre-Heat Method B, and Display Removal to Display Removal (With Display
Removal Fixture).
Revised Pre-Heat Method A steps to allow proper Hot Plate warm up time.
Added Pre-Heat Method B as an additional option for process time reduction.
Changed the Generic Lens Removal Fixture set temperature from 110 °C
(230 °F) to 100 °C (212°F).
Added instruction to hold the Styx Lens Removal Fixture down until the
Generic Lens Removal Fixture gauge reads 90 kPa.
Added note to Display Removal (Damaged Display Only) stating optional pre-
heat methods A and B can be used before removing a damaged Display
Lens.
Attached Generic Lens Removal Fixture user manual to end of manual.