Battery Removal - Motorola Moto E Service & Repair Manual

Failure to adhere to Safety Critical Note(s) may increase
risk of rupture, burning, or failure to function safely when
used by the customer. Refer to the Battery Safety
Guidelines.
1. With 2 hands, carefully twist the Housing
repeatedly to free the Battery Adhesive.
Do not twist the Housing more than necessary.
Only a slight amount of force is required to free
the Battery Adhesive.
If the Battery will be replaced, record the Battery
part number (starts with "SNN") and reprogram the
Battery part number in the PCB using MotoService
"Battery Link" use case after assembly.
Handle the Battery Pack with care. If dropped to the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.