3.
Remove the Loudspeaker-Side Adhesive from
the carrier.
4.
Place the Loudspeaker-Side Adhesive in the
fixture over the Top Spacer. Align the adhesive
using the cutout in the fixture and the tab on the
adhesive liner.
5.
Press down on the Loudspeaker-Side Adhesive
to secure it to the Top Spacer.
6.
Remove the Top Spacer Adhesive from the
carrier.
7.
Place the Top Spacer Adhesive in the fixture
over the Top Spacer. Align the adhesive using
the pin in the fixture and the rectangular cutout in
the Top Spacer.
8.
Press down on the Top Spacer Adhesive to
secure it to the Top Spacer.