Motorola Moto E Service & Repair Manual page 28

7. Remove the phone from the Styx Lens Removal
Fixture.
Wear protective gloves when handling heated
parts.
8. Use the Thin Plastic Spudger to separate the
remaining adhesive from the USB side of the
phone.
Do not insert the Thin Plastic Spudger farther than
necessary. The Lens may separate from the
Display.
9. Use the Tweezers to disconnect the Battery.
To avoid damage to the Display, the Battery must
be disconnected before disconnecting the Display
Flex.
10. Use the Tweezers to remove the Kapton® Tape
from the Display Flex ZIF Connector Door.
After you remove the Kapton Tape, you
cannot reuse it.
11. Use the Blackstick to open the Display Flex ZIF
Connector Door.
12. Slide the Display Flex free from the ZIF
Connector.
Do not damage the Display Flex.